{"title":"TENSOR Series","description":"\u003cp\u003eExtended channel counts and amplifier architectures: TENSOR 8, TENSOR 12 and TENSOR 18. High-performance car DSP amplifiers from 8 to 18 DSP outputs, with W8 and ADAU1452 processing and W-ILM OEM integration.\u003c\/p\u003e","products":[{"product_id":"tensor-8","title":"TENSOR 8","description":"\u003cp\u003eThe TENSOR 8 is an 8-channel DSP with 10-channel integrated amplification, designed for compact high-performance systems. It delivers 8 × 40 W + 2 × 80 W at 4 Ω across 10 physical amplified channels, driven by WONDOM's W8 DSP.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEight independently processed DSP outputs from six inputs\u003c\/li\u003e\n\u003cli\u003e8 × 40 W + 2 × 80 W @ 4 Ω across 10 physical amplified channels\u003c\/li\u003e\n\u003cli\u003eDSP channels 5 and 6 each control two 40 W amplifier channels\u003c\/li\u003e\n\u003cli\u003eTDA7851 plus two pairs of Toshiba 2SC5200 \/ 2SA1943 output devices\u003c\/li\u003e\n\u003cli\u003eWONDOM W8 DSP with 24-bit processing at up to 192 kHz\u003c\/li\u003e\n\u003cli\u003eTwo ES7210 ADCs and CJC4344H DAC conversion\u003c\/li\u003e\n\u003cli\u003eUSB, high-level and optical inputs, plus Bluetooth 5.4 streaming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eActive cooling\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1035\/5569\/4963\/files\/wondom-tensor-8-active-cooling.png?v=1794688256\" alt=\"Active cooling inside the WONDOM TENSOR 8 car DSP amplifier: a blower fan in the lid moving air across the board and finned aluminium chassis\" width=\"1536\" style=\"width: 100%; height: auto;\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe TENSOR 8 uses active cooling. A blower fan built into the chassis lid moves air across the amplifier board, working alongside the finned aluminium chassis to carry heat away from the power stage.\u003c\/p\u003e\n\u003ch3\u003eRecommended system configurations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Front and Rear Fill:\u003c\/strong\u003e an active front on 4 × 40 W and rear fill on 2 × 40 W, with an external subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Three-Way Front:\u003c\/strong\u003e a three-way active front stage on 6 × 40 W, with the rear on 2 × 40 W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Front, Centre and Subwoofer:\u003c\/strong\u003e active front and rear on built-in power, with an externally amplified centre and subwoofer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the System Configuration guide for the full output-by-output plan for each setup.\u003c\/p\u003e\n\u003ch3\u003eW-ILM OEM integration\u003c\/h3\u003e\n\u003cp\u003eW-ILM (WONDOM Intelligent Load Management) is built into the hardware. It combines load generation, signal stabilisation and load-sensing adaptation to present the electrical load a factory head unit expects, helping prevent speaker-disconnection detection and reducing the need for separate load-generating accessories.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP inputs \/ outputs:\u003c\/strong\u003e 6 \/ 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP processor:\u003c\/strong\u003e WONDOM proprietary DSP IC (W8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in amplification:\u003c\/strong\u003e 8 × 40 W + 2 × 80 W @ 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier:\u003c\/strong\u003e TDA7851 + 2 pairs Toshiba 2SC5200 \/ 2SA1943\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADC:\u003c\/strong\u003e ES7210 × 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAC:\u003c\/strong\u003e CJC4344H (2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio resolution:\u003c\/strong\u003e 24-bit, up to 192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e USB; high-level input; Optical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e Bluetooth 5.4 (JL AC6951C8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSNR:\u003c\/strong\u003e 102 dB (typ.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD+N:\u003c\/strong\u003e 0.009% (typ.)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WONDOM","offers":[{"title":"Default Title","offer_id":67407690563955,"sku":null,"price":59359.5,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1035\/5569\/4963\/files\/wondom-tensor-8-floating-rear-view.png?v=1794655273"},{"product_id":"tensor-12","title":"TENSOR 12","description":"\u003cp\u003eThe TENSOR 12 is a 12-input, 12-output car DSP amplifier for high-power active and subwoofer systems. Alongside 8 × 40 W, its four 100 W channels can run in Regular, Parallel, Bridged or Parallel Bridged mode, up to 1 × 400 W at 4 Ω for a subwoofer.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwelve independently processed DSP outputs from twelve inputs\u003c\/li\u003e\n\u003cli\u003e8 × 40 W + 4 × 100 W @ 4 Ω built-in amplification (TDA7851 + 2 × MA5302MS)\u003c\/li\u003e\n\u003cli\u003e100 W channel modes: Regular 4 × 100 W, Parallel 2 × 200 W, Bridged 2 × 200 W @ 4 Ω, Parallel Bridged 1 × 400 W @ 4 Ω\u003c\/li\u003e\n\u003cli\u003eWONDOM W8 DSP with 24-bit processing at up to 192 kHz\u003c\/li\u003e\n\u003cli\u003eThree ES7210 ADCs and CJC4344H DAC conversion\u003c\/li\u003e\n\u003cli\u003eUSB, high-level, optical, coaxial and OTG 96K\/192K (AMP1821) inputs with reverse charging, plus Bluetooth 5.4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMA5302MS amplifier stage\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1035\/5569\/4963\/files\/wondom-tensor-12-ma5302ms-amplifier.png?v=1794688555\" alt=\"Two MA5302MS amplifier chips inside the WONDOM TENSOR 12 car DSP amplifier, with the four 100 W channel modes up to 1 x 400 W at 4 ohm\" width=\"1536\" style=\"width: 100%; height: auto;\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003eTwo MA5302MS amplifier ICs power the TENSOR 12's four 100 W channels, delivering up to 400 W at 4 Ω. Choose the mode that suits your system:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegular:\u003c\/strong\u003e 4 × 100 W @ 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel:\u003c\/strong\u003e 2 × 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged:\u003c\/strong\u003e 2 × 200 W @ 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel Bridged:\u003c\/strong\u003e 1 × 400 W @ 4 Ω\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWiring the 100 W channels\u003c\/h3\u003e\n\u003cp\u003eCH9 to CH12 can be combined three ways. Wire the terminals exactly as shown and set the matching channel phase in the tuning software before you power up. A phase setting that doesn't match the wiring risks damaging the amplifier.\u003c\/p\u003e\n\u003ch4\u003eParallel: 2 × 200 W\u003c\/h4\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1035\/5569\/4963\/files\/wondom-tensor-12-wiring-parallel-v2.svg?v=1794819934\" alt=\"WONDOM TENSOR 12 parallel wiring diagram: CH9 and CH10 plus terminals to one speaker plus, minus terminals to speaker minus, CH11 and CH12 wired the same way to a second 2 or 4 ohm speaker\" width=\"1536\" style=\"width: 100%; height: auto;\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003eJoin CH9 + and CH10 + to the speaker +, and CH9 − and CH10 − to the speaker −. Wire CH11 and CH12 the same way for the second speaker. Use a 2 Ω or 4 Ω speaker on each pair.\u003c\/p\u003e\n\u003ch4\u003eBridged: 2 × 200 W @ 4 Ω\u003c\/h4\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1035\/5569\/4963\/files\/wondom-tensor-12-wiring-bridged-v2.svg?v=1794819934\" alt=\"WONDOM TENSOR 12 bridged wiring diagram: CH9 plus to speaker plus and CH10 plus to speaker minus, CH11 and CH12 the same for a second 4 ohm speaker, with CH10 and CH12 set to inverse phase\" width=\"1536\" style=\"width: 100%; height: auto;\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003eConnect CH9 + to the speaker + and CH10 + to the speaker −, then wire CH11 and CH12 the same way for the second speaker. The − terminals are not used. Use 4 Ω speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware phase:\u003c\/strong\u003e CH9 normal, CH10 inverse, CH11 normal, CH12 inverse.\u003c\/p\u003e\n\u003ch4\u003eParallel bridged: 1 × 400 W @ 4 Ω\u003c\/h4\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1035\/5569\/4963\/files\/wondom-tensor-12-wiring-parallel-bridged-v2.svg?v=1794819934\" alt=\"WONDOM TENSOR 12 parallel bridged wiring diagram: CH9 and CH10 plus terminals to the speaker plus, CH11 and CH12 plus terminals to the speaker minus, one 4 ohm speaker at 400 W\" width=\"1536\" style=\"width: 100%; height: auto;\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003eJoin CH9 + and CH10 + to the speaker +, and CH11 + and CH12 + to the speaker −. There is no negative terminal connection. Use one 4 Ω speaker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware phase:\u003c\/strong\u003e CH9 and CH10 normal, CH11 and CH12 inverse.\u003c\/p\u003e\n\u003ch3\u003eOTG input with reverse charging\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1035\/5569\/4963\/files\/wondom-tensor-12-otg-input-v2.png?v=1794688743\" alt=\"WONDOM TENSOR 12 rear panel with a smartphone connected to the OTG IN port, which supports 96K and 192K audio and reverse charging\" width=\"1536\" style=\"width: 100%; height: auto;\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003eConnect your phone directly to the OTG IN port for wired digital audio, with a switch on the panel to select 96K or 192K. The same connection supports reverse charging, so your phone charges while it plays.\u003c\/p\u003e\n\u003ch3\u003eRecommended system configurations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Power Front and Subwoofer:\u003c\/strong\u003e active front, rear and centre on the 40 W channels, with the four 100 W channels in Parallel Bridged mode for 1 × 400 W to a compatible subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Front and Dual Subwoofers:\u003c\/strong\u003e a three-way front on 6 × 40 W and the 100 W channels as two bridged pairs, 200 W at 4 Ω per subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Active Front and Rear with Centre:\u003c\/strong\u003e selected front drivers on the 100 W channels, rear on 4 × 40 W, with external amplification where the guide specifies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the System Configuration guide for the full output-by-output plan for each setup.\u003c\/p\u003e\n\u003ch3\u003eW-ILM OEM integration\u003c\/h3\u003e\n\u003cp\u003eW-ILM (WONDOM Intelligent Load Management) is built into the hardware. It combines load generation, signal stabilisation and load-sensing adaptation to present the electrical load a factory head unit expects, helping prevent speaker-disconnection detection and reducing the need for separate load-generating accessories.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP inputs \/ outputs:\u003c\/strong\u003e 12 \/ 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP processor:\u003c\/strong\u003e WONDOM proprietary DSP IC (W8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in amplification:\u003c\/strong\u003e 8 × 40 W + 4 × 100 W @ 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier:\u003c\/strong\u003e TDA7851 + 2 × MA5302MS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADC:\u003c\/strong\u003e ES7210 × 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAC:\u003c\/strong\u003e CJC4344H (2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio resolution:\u003c\/strong\u003e 24-bit, up to 192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e USB; high-level input; Optical; Coaxial; OTG 96K\/192K (AMP1821)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e Bluetooth 5.4 (JL AC6951C8)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSNR:\u003c\/strong\u003e 102 dB (typ.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD+N:\u003c\/strong\u003e 0.009% (typ.)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WONDOM","offers":[{"title":"Default Title","offer_id":67407691383155,"sku":null,"price":81432.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1035\/5569\/4963\/files\/wondom-tensor-12-floating-rear-view.png?v=1794655278"},{"product_id":"tensor-18","title":"TENSOR 18","description":"\u003cp\u003eThe TENSOR 18 is WONDOM's flagship 16-input, 18-output car DSP amplifier for multi-way and multi-zone systems. Built around the Analog Devices ADAU1452 with 16 × 60 W at 4 Ω, it reaches 105 dB SNR and 0.002% THD+N, the highest performance in the range.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEighteen independently processed DSP outputs from sixteen inputs\u003c\/li\u003e\n\u003cli\u003e16 × 60 W @ 4 Ω built-in amplification from eight CSC3601 devices, 960 W stated total\u003c\/li\u003e\n\u003cli\u003eOUT 1–16 run on the built-in channels; OUT 17–18 are signal outputs for an external amplifier\u003c\/li\u003e\n\u003cli\u003eAnalog Devices ADAU1452 DSP with 24-bit processing at up to 192 kHz\u003c\/li\u003e\n\u003cli\u003eFour ES7210 ADCs with PCM1681 and PCM1754 DAC conversion\u003c\/li\u003e\n\u003cli\u003eUSB 3.0, high-level, optical and coaxial inputs, plus Bluetooth 6.0 (dual-core JL7031C8)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eADAU1452 DSP\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1035\/5569\/4963\/files\/wondom-tensor-18-adau1452-dsp.png?v=1794689471\" alt=\"Analog Devices ADAU1452 DSP chip on the WONDOM TENSOR 18 car DSP amplifier board, processing 16 inputs and 18 outputs\" width=\"1536\" style=\"width: 100%; height: auto;\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003eAt the heart of the TENSOR 18 is the Analog Devices ADAU1452 DSP, processing 16 inputs into 18 independently controlled outputs.\u003c\/p\u003e\n\u003ch3\u003e18-channel DAC\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1035\/5569\/4963\/files\/wondom-tensor-18-18ch-dac-cinematic.png?v=1794692816\" alt=\"Cinematic close-up of two PCM1681 DACs and one PCM1754 DAC on the WONDOM TENSOR 18 board, converting 8 + 8 + 2 = 18 channels\" width=\"1536\" style=\"width: 100%; height: auto;\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003eThree DACs convert all eighteen processed channels back to analogue:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × PCM1681:\u003c\/strong\u003e 8 channels each, 16 channels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × PCM1754:\u003c\/strong\u003e 2 channels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal:\u003c\/strong\u003e 8 + 8 + 2 = 18 channels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended system configurations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference Three-Way System:\u003c\/strong\u003e 11 × 60 W across a three-way front and rear, with an external subwoofer amplifier of roughly 300–600 W RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Way Audiophile Front:\u003c\/strong\u003e a four-way front stage and rear on 13 × 60 W, with external amplification for the subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltimate Multi-Zone System:\u003c\/strong\u003e 15 × 60 W for front, rear, centre and roof speakers, with external amplification for the subwoofers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the System Configuration guide for the full output-by-output plan for each setup.\u003c\/p\u003e\n\u003ch3\u003eW-ILM OEM integration\u003c\/h3\u003e\n\u003cp\u003eW-ILM (WONDOM Intelligent Load Management) is built into the hardware. It combines load generation, signal stabilisation and load-sensing adaptation to present the electrical load a factory head unit expects, helping prevent speaker-disconnection detection and reducing the need for separate load-generating accessories.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP inputs \/ outputs:\u003c\/strong\u003e 16 \/ 18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP processor:\u003c\/strong\u003e Analog Devices ADAU1452\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in amplification:\u003c\/strong\u003e 16 × 60 W @ 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier:\u003c\/strong\u003e CSC3601\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADC:\u003c\/strong\u003e ES7210 × 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAC:\u003c\/strong\u003e PCM1681 (8)+ PCM1754 (2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio resolution:\u003c\/strong\u003e 24-bit, up to 192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e USB 3.0; high-level input; Optical; Coaxial\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e Bluetooth 6.0 (JL7031C8 (Dual Core))\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSNR:\u003c\/strong\u003e 105 dB (typ.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD+N:\u003c\/strong\u003e 0.002% (typ.)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WONDOM","offers":[{"title":"Default Title","offer_id":67407691841907,"sku":null,"price":81432.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1035\/5569\/4963\/files\/wondom-tensor-18-floating-rear-view.png?v=1794655284"}],"url":"https:\/\/wondom.net\/collections\/tensor-series.oembed","provider":"WONDOM","version":"1.0","type":"link"}