Skip to content
0 items in cart

Cart

Your cart is empty.

Technology

Engineered for signal integrity.

Every WONDOM processor follows one disciplined path, from the first input stage to the final amplified channel.

ES7210 analog-to-digital converter chip on a WONDOM DSP circuit board

Conversion · ADC

ES7210. Precision at the first stage.

Every analogue input on a WONDOM processor is digitised by ES7210 converters at 24-bit resolution before it reaches the DSP. Larger models add more converters to handle more inputs.

CORE 6
1 × ES7210
CORE 8
1 × ES7210
CORE 12
3 × ES7210
TENSOR 8
2 × ES7210
TENSOR 12
3 × ES7210
TENSOR 18
4 × ES7210

Conversion · DAC

CJC4344H. Clean conversion back to analogue.

After processing, dedicated DAC chips turn the signal back into analogue, two channels per CJC4344H. TENSOR 18 uses PCM1681 and PCM1754 converters for its higher channel count.

CORE 6
3 × CJC4344H
CORE 8
4 × CJC4344H
CORE 12
6 × CJC4344H
TENSOR 8
4 × CJC4344H
TENSOR 12
6 × CJC4344H
TENSOR 18
2 × PCM1681 + 1 × PCM1754
CJC4344H digital-to-analog converter chip on a WONDOM DSP circuit board

Thermal design · TENSOR 8

Active cooling

The TENSOR 8 uses active cooling. A blower fan built into the chassis lid moves air across the amplifier board, working alongside the finned aluminium chassis to carry heat away from the power stage.

View TENSOR 8
Active cooling inside the WONDOM TENSOR 8 car DSP amplifier: a blower fan in the lid moving air across the board and finned aluminium chassis
WONDOM TENSOR 12 rear panel with a smartphone connected to the OTG IN port, which supports 96K and 192K audio and reverse charging

Digital input · TENSOR 12

OTG input with reverse charging

Connect your phone directly to the OTG IN port for wired digital audio, with a switch on the panel to select 96K or 192K. The same connection supports reverse charging, so your phone charges while it plays.

Sample rate
96K / 192K
Phone charging
Reverse charging
View TENSOR 12

Model technology

Choose a model

Select any CORE or TENSOR model to see the technology inside it.

CORE Series
TENSOR Series
CORE Series

CORE 6

4 / 6 CH · 24-bit · 96 kHz

CORE 6

Processing

DSP processor
WONDOM proprietary DSP IC (W7)
DSP inputs / outputs
4 / 6
Audio resolution
24-bit
Max sampling rate
96 kHz

Conversion

ADC
ES7210 × 1
DAC
CJC4344H (2) · 3

Amplification

Amplifier
TDA7851 Class AB × 1
Output power (4 Ω)
4 × 30 W
Power notes
120 W stated total; 4 Ω

Connectivity

Inputs
USB; high-level input
Bluetooth
JL AC6951C8 · Bluetooth 5.4

Performance

SNR
102 dB (typ.)
THD+N
0.009% (typ.)

Load management

W-ILM
Integrated across model range

OEM integration

W-ILM

WONDOM Intelligent Load Management

W-ILM is WONDOM's integrated load-generation, signal-stabilisation and load-sensing technology, designed to improve compatibility between aftermarket DSP amplifiers and factory-installed automotive audio systems.

Its purpose is to keep the vehicle's original head unit and audio system operating correctly when a WONDOM DSP is integrated.

  1. 01

    Load Generation

    Some OEM head units monitor the load on their speaker outputs, and may detect an abnormal load or open circuit when factory speakers are replaced by a DSP input. W-ILM presents the electrical load the head unit expects.

    • Maintains factory head-unit operation
    • Prevents speaker-disconnection detection
    • Supports OEM systems that monitor speaker loads
    • Reduces the need for external load-generating accessories
  2. 02

    Signal Stabilisation

    Supports consistent signal behaviour during OEM integration, particularly with head units that have speaker-detection or load-monitoring functions, so the interface with the factory outputs stays reliable.

  3. 03

    Load-Sensing Adaptation

    Accounts for electrical load conditions within the integration. Rather than treating OEM integration as a simple signal connection, W-ILM builds load-related functionality into the DSP hardware.

W-ILM load management module on a WONDOM DSP circuit board, three-quarter view
W-ILM load management module on a WONDOM DSP board in violet side light
W-ILM load management module seated on a WONDOM DSP main board, viewed from above
W-ILM load management module, front view with violet backlight
Close-up of the W-ILM module showing its JK 030 inductors and 121 resistors
W-ILM load management module on a WONDOM DSP board in cyan and violet rim light

Why it matters

With and without load management

Without load management With W-ILM
OEM may detect disconnected speakers Provides load-generation functionality
Potential speaker-load errors Supports OEM load compatibility
May require external load devices Integrated load-generation circuit
Additional integration complexity Integrated load-management approach

Built into the hardware

W-ILM is not an equaliser, crossover or sound-processing algorithm. It is an OEM integration technology built into WONDOM DSP hardware.

Installers get load generation, signal stabilisation and load sensing within the DSP, rather than necessarily needing separate external hardware.

Input capability

Source formats

High-level
48 kHz
USB
96 kHz
Optical
192 kHz

General input capability figures as supplied.

Choose your view

How would you like to browse WONDOM? You can switch any time with the sun and moon icon in the header.